cloud edwards
Member
2016 engineering multi-number 18.
How does one do this (refer to attachment).
How does one do this (refer to attachment).
-
Best of luck to the class of 2024 for their HSC exams. You got this! Let us know your thoughts on the HSC exams here -
YOU can help the next generation of students in the community! Share your trial papers and notes on our Notes & Resources page
2016 hsc engineering multi-choice help (1 Viewer)
- Thread starter cloud edwards
- Start date
Infernal3
New Member
- Joined
- Feb 4, 2016
- Messages
- 7
- Gender
- Male
- HSC
- 2017
Okay - here's what you need to do:
You have to think how much Y (outer one) will spin if pulley X completes a full revolution.
Pulley X's radius is half of Y's (outer one) so if X completes 1 revolution, Y (outer one) will complete 0.5 revolutions (350 is double 175), therefore its speed will be halved - 0.5 * 150 = 75 rpm.
Then if you look at the pulley inside Y, since it is connected to the outer one, it'll have the same speed - 75 rpm.
Looking at Z, its radius is half of Y (inner one), so basically Z will spin twice as fast as Y (the inner one). So its speed will be double - 75 * 2 = 150 rpm.
As for direction, you should be able to visualise it. X is rotating clockwise so Y (both outer and inner ones) will rotate clockwise as well. So Z will also rotate clockwise.
You have to think how much Y (outer one) will spin if pulley X completes a full revolution.
Pulley X's radius is half of Y's (outer one) so if X completes 1 revolution, Y (outer one) will complete 0.5 revolutions (350 is double 175), therefore its speed will be halved - 0.5 * 150 = 75 rpm.
Then if you look at the pulley inside Y, since it is connected to the outer one, it'll have the same speed - 75 rpm.
Looking at Z, its radius is half of Y (inner one), so basically Z will spin twice as fast as Y (the inner one). So its speed will be double - 75 * 2 = 150 rpm.
As for direction, you should be able to visualise it. X is rotating clockwise so Y (both outer and inner ones) will rotate clockwise as well. So Z will also rotate clockwise.
Last edited:
cloud edwards
Member
thanx
cloud edwards
Member
Thanx man, you're a life saver